Tuesday, March 05, 2013

Today's progress

My studio time today was intermittent due to other obligations, but I managed to do enough to share here. One of the commenters yesterday wondered how I was actually using the grid and sketch on the interfacing since it was getting covered up. At this point I am just laying the pieces on the top as I create them. They can be moved aside when I need to work on another element. Here, you see that I have flipped up the building pieces in order to see and work on the windows that will go on top.


Now you see that the windows and upper side pillars have been added. Still nothing is attached to the interfacing. The pins are holding the windows to the yellow building fabric.


Now I am moving into the bottom section of the building and I have a decision to make. The arches in the front of the building will extend into the yellow fabric. Do I cut those arches out of the yellow fabric and add fabric behind, or do I cut the arches out of the interior fabric and put them on top? I could do either and probably either would work, but I am kind of particular about layering my fabric in the same order that the parts of the building are actually layered. So I cut the arches out of the yellow fabric and the deep purpley shadowed fabric will go behind the arches.

That's as far as I got today.

The thread that I ordered from Connecting Threads came today.

Isn't it pretty? It will be a real shame if it is crummy thread. I took advantage of a savings you get if you order it in "collections." I tried breaking it and it seemed strong enough. I took a spool out of its plastic wrap and tried a little sewing. My machine seemed to like it fine and it looks good to me.


And, before I sign off here, here's something that blew my mind. One of the commenters on the Threads post said that Sharon Schamber recommends dipping your entire spool of thread in mineral oil, then quickly drying it off to keep the thread from drying out and so it produces less lint. This sounded really crazy to me, but with just enough logic to it to intrigue me. I googled it and found several mentions of Sharon's recommendation. Here is one of them. (This particular "tip" is toward the bottom of the blog post.) Have you heard of this? Have you tried it? I'm going to try it on a spool that is nearly used up! I think dipping sounds really messy. Maybe a little oil in a little squeeze bottle with a fine tip spout? I wonder if this is basically the same idea? I've never used it either.

4 comments:

  1. I love seeing your process with these pieces. The plaid fabrics are so perfect for these architectural designs. As to the thread tip it sounds a bit crazy to me. Fortunately I've never had problems with thread that would prompt me to try it. I look forward to hearing your results.

    ReplyDelete
  2. Instead of dipping thread in oil, you could use All Purpose Sewer's Aid found in quilt shops. I use it with Sulky variegated to prevent breakage. Simply apply three thin lines (end to end) on the spool.

    ReplyDelete
  3. Many thanks for answering my question in today's post!

    ReplyDelete
  4. Have no fear using Connecting Threads threads. They are great. As good as Aurfil at half the price.

    ReplyDelete